AS5600 encoder mount for 18mm micro-BLDC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a common AS5600 PCB to a tiny drone BLDC motor for playing around with motor control
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 57
- Makes
- 0
- Views
- 500
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
For a 18mm motor with three screw mounting
AS5600: www.aliexpress.com/item/1005006502384626.html
Motor: www.aliexpress.com/item/1005006110056005.html
Tolerances are tight, either use a 2mm drill bit to make sure the magnet holder fits onto the axis snugly, or scale the model up/down to fit your printer's properties.
Press magnet into magnet holder, slide onto motor axis, and optionally use a tiny bit of super glue to keep it in place
Mount motor to holder first, then attach the sensor PCB using four screws.
Combine with something like a simpleFOC mini and esp32 to have fun learning about motor control with minimal material effort.