Raspberry Pi5 NAS 10-inch server rack plate, 2 hot swap SSD units, HDMI and power connectors

This 10 inch server rack plate was designed for building Raspberry Pi5 NAS servers, it securely holds two SSD units, optimizing storage density in a compact 5U by 1U form factor compatible with standard home lab racks. 

Ideal for RAID 0 or RAID 1 configurations using 2 disks.

The plate provides dual D-Type connector layout for HDMI and USB-C Power 

Featuring slider caddy trays, it allows easy hot swapping to reduce downtime and streamline maintenance in professional IT environments.

Please note, this rack plate requires purchasing two SATA 22-pin male to female adapters separately to connect your SSDs, 2 M3x30mm screws, 2 M3x10mm screws and 2 M3x3mm screws.

This model is part of the Ocktron lineup, it mounts in our 10-inch Mini Home Lab Rack.

3D Print Profile:

• PETG: for structural strength.

• Layer height: 0.2 mm

• Print speed: use standard for optimum results, or 40–60 mm/s (slower for fine details).

• Wall loops: 4 layers for optimal outer strength.

• Top layers: 5.

• Bottom layers: 3.

• Infill: 20% for optimal quality/strength of the pieces.

• Material support: yes

• Brim: not required.

BOM:

• 2 x SATA 22-pin male to female adapter to connect your SSDs

• 1 x D-Type HDMI Panel Mount Pass Though Adapter

• 1 x D-Type Module USB C Pass Through Connector

• 2 x M3x30mm screws

• 4 x M3x10mm screws

• 2 x M3x3mm screws

• 4 x #6 3/4 inches self tapping screws (American standard), or M4x16mm self tapping screws (Metric standard).

For more assembly details please refer to the video in the gallery.