Round 50mm Wall Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print and use at own risk. Referring to this as a "Safe" hook is in no way a guarantee of safety!
I wanted to design a hook to use for my kids dress up clothes, jackets, etc. I had purchased small metal hooks and after installing several in a row, it felt like I was created a wall of nails or something. I wanted something that when mounted at a low level around playing kids didn't present such a hazard.
Can be printed without support. Angles for overhang should print without issue. I printed large round end on the build plate, which leaves a nice texture on the end. Screw is through the main body for additional strength. I printed on default settings (0.2mm, 20% infill).
I mounted with #10 2-½" wood screws to a wood strip.
Center hole is 5mm and minimum screw length of 36mm to get through the print. Detailed dimensions are shown in the photo of the sketch. Sketch was revolved to make the body.
Happy printing!