1 / 3
Replacement Footrest for Medicco / Quickie Xenon² – Folding Frame Compatible
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 3D-printed replacement footrest designed for the Medicco / Quickie Xenon² wheelchair with a folding frame. The
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
✔ Features
- compatible with Quickie Xenon² (Medicco) – folding frame version
- accurate mounting geometry
- solid design suitable for regular everyday use
- easy installation using the original pin/screw
- optional editable STEP file for custom modifications (if you upload one)
📐 Compatibility
Designed for:
- Quickie Xenon² / Medicco
- folding frame type
🛠 Recommended Print Settings
- Material: PETG or ASA (PLA not recommended)
- Layer height: 0.2 mm
- Perimeters/Walls: 4–6
- Infill: 80-100% (Cubic / Grid)
🧪 Notes on Strength
The model has been tested under normal daily use without noticeable deformation.
For maximum durability, ASA or higher wall count is recommended.
⚠ Disclaimer
This is not a certified medical device.
Use and install at your own discretion.