1 / 3
Replacement Footrest for Medicco / Quickie Xenon² – Folding Frame Compatible
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-printed replacement footrest designed for the Medicco / Quickie Xenon² wheelchair with a folding frame. The
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
✔ Features
- compatible with Quickie Xenon² (Medicco) – folding frame version
- accurate mounting geometry
- solid design suitable for regular everyday use
- easy installation using the original pin/screw
- optional editable STEP file for custom modifications (if you upload one)
📐 Compatibility
Designed for:
- Quickie Xenon² / Medicco
- folding frame type
🛠 Recommended Print Settings
- Material: PETG or ASA (PLA not recommended)
- Layer height: 0.2 mm
- Perimeters/Walls: 4–6
- Infill: 80-100% (Cubic / Grid)
🧪 Notes on Strength
The model has been tested under normal daily use without noticeable deformation.
For maximum durability, ASA or higher wall count is recommended.
⚠ Disclaimer
This is not a certified medical device.
Use and install at your own discretion.