Philips 6700 Series Smart TV Foot for 55PUS6704/12
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Foot/Stand for Philips 6700 Series Smart TVs like the 55PUS6704/12
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 24
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
Just bought a used TV. It was cheap, but the feet were missing. They were available online (even some 3D printed ones) but no STL. The interface to the TV is simple and i just made one myself. Its high enough to reach the manual controlls of the TV.
4x M4x16 Hex Head machine screws are needed. Shorter ones could fit too.
My exact model ist the 55PUS6704/12, but i think it should fit ohters from the 6700 Series too. You can check this if you just print a flat piece of the interface (provided here as stl).
Its met to be printed on the side so the part is strong in the most important direction. I suggest printing it in some stronger Material like PETG.
Just print two, i made them so they both fit left and right - unlike the original feet …
Also provided is the FreeCAD file (albeit its not very good as im just about to learn CAD design).
The model can be rotatet to just fit on a Prusa MK4!