1 / 1
Parametric Double-Cable Grommet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric grommet to cover cable holes in wall.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Description
Parametric grommet to cover cable holes in wall. I have antenna cables coming from outside the house. Placing a hand near the hole with/without this is like night and day during winter, without the grommet your hand gets cold quickly.
This is designed to fit a single hole in the wall that has two cables going through it
Printing/Designing
You need to define the following parameters
- cable_1_diameter / cable_2_diameter: the diameters of the two cables.
- wall_hole_diameter: the diameter of the hole in the wall, make sure this is close to it for a snug fit.
- hole_depth: how deep the grommet will enter the hole
I printed out of ABS, 2 perimeters, 15% gyroid infill, 0.28 Draft profile on my MK4S 0.4mm HF nozzle.
Supports are not needed.