1 / 1
Parametric Double-Cable Grommet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric grommet to cover cable holes in wall.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
Parametric grommet to cover cable holes in wall. I have antenna cables coming from outside the house. Placing a hand near the hole with/without this is like night and day during winter, without the grommet your hand gets cold quickly.
This is designed to fit a single hole in the wall that has two cables going through it
Printing/Designing
You need to define the following parameters
- cable_1_diameter / cable_2_diameter: the diameters of the two cables.
- wall_hole_diameter: the diameter of the hole in the wall, make sure this is close to it for a snug fit.
- hole_depth: how deep the grommet will enter the hole
I printed out of ABS, 2 perimeters, 15% gyroid infill, 0.28 Draft profile on my MK4S 0.4mm HF nozzle.
Supports are not needed.