ESRack - Module 250 - Unifi USW-Flex-2.5G-8
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Module 250 for ESRack system to mount Unifi USW-Flex-2.5G-8
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ESRack - Module 250 - Unifi USW-Flex-2.5G-8 is creatated based on “ESRack - Module 250- Blank” is 50 mm wider than original module created by @EvilProphet
To create 19" rack module it need to be used together with “ESRack - Module 150 - Blank” or some modules designed based on this short version
Possible Configurations:
- [Mounting Bracket Short] + [Module 250] + [Module 150] + [Mounting Bracket Short]
It can be fit into Prusa MK3 & MK4 printers if you place it at an angle (diagonal to theprint bed)
Suggested Print Settings
Material: PETG (Prusament PETG Galaxy Black)
Nozzle: 0.4 mm
Layer height: 0.2 mm
Wall loops: 3
Top/Bottom shell layers: 3
Infill: +25%
Infill pattern: Gyroid
Orientation: Print on the front surface