Handvat voor O+F INTEGRAL IG 80–100
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handvat voor / Handle for O+F INTEGRAL IG 80-100 zwartglazen deksel t.b.v. afzuiging Art. nummer: IG 80TOP GL S
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
Dit is een handvat voor het zwartglazen deksel van de O+F INTEGRAL IG 80–100 afzuigunit (artikelnummer IG 80TOP GL S).
Het ontwerp is gemaakt als toevoegng op het orginele artikel.
Het 3D-model is gebaseerd op nauwkeurige metingen van het originele onderdeel en past op het zwarte glazen deksel door middel van bestaande vinger gaten en wordt gemonteerd met 2 stuks 3mm bout en moer.
Het handvat heeft een ergonomische curve waardoor het comfortabel en stevig vast te pakken is.
⚠ Let op: dit is geen officieel O+F-onderdeel. Gebruik op eigen risico.
✔ Past op O+F INTEGRAL IG 80–100 (IG 80TOP GL S) glazen deksel
✔ Ergonomisch ontwerp
✔ Printbaar zonder support
✔ Vervangingsonderdeel dat het originele handvat functioneel evenaart
✔ Sterk genoeg bij gebruik van PLA, PETG of ABS
Aanbevolen printinstellingen
Print settings:
Laagdikte: 0.2 mm
Infill: 40–60% (Grid, Gyroid of Cubic)
Perimeters: 3
Top/bottom layers: 5–6
____________________________________________________________________________________________________________________________
This is a handle for the black glass lid of the O+F INTEGRAL IG 80–100 extractor unit (item number IG 80TOP GL S). The design was created as an addition to the original part.
The 3D model is based on precise measurements of the original part and fits the black glass lid using existing finger holes and is mounted with two 3mm bolts and nuts. The handle has an ergonomic curve, making it comfortable and secure to grip. ⚠ Please note:
This is not an official O+F part. Use at your own risk.
✔ Fits O+F INTEGRAL IG 80–100 (IG 80TOP GL S) glass lid
✔ Ergonomic design ✔ Printable without support
✔ Replacement part that functionally matches the original handle
✔ Strong enough when using PLA, PETG, or ABS
Recommended print settings
Print settings: Layer thickness: 0.2 mm
Infill: 40–60% (Grid, Gyroid, or Cubic)
Perimeters: 3
Top/bottom layers: 5–6