pBone Horizontal Wall Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Apparently not all trombone mounts work for the pBone, so I decided to make my own model. This holds the thing horizontally, barely off the wall, with one arm holding the slide lock and the other at the top of the slide itself.
Print upside down, either solid or with six perimeters, and it’ll be plenty sturdy. I added some custom shapes with 100% infill in the 3MF file, to reinforce the arms and screw holes—this was probably overkill. I screwed into a stud with some black screws I had around and it’s definitely not going anywhere. (I used Prusament matte black PETG, but I’m not sure that matters.)
Screw holes are 3.8mm wide, with a 7mm counterbore that’s inset 4mm.