pBone Horizontal Wall Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smallish, wall-mounted hanger for holding a pBone horizontally.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Apparently not all trombone mounts work for the pBone, so I decided to make my own model. This holds the thing horizontally, barely off the wall, with one arm holding the slide lock and the other at the top of the slide itself.
Print upside down, either solid or with six perimeters, and it’ll be plenty sturdy. I added some custom shapes with 100% infill in the 3MF file, to reinforce the arms and screw holes—this was probably overkill. I screwed into a stud with some black screws I had around and it’s definitely not going anywhere. (I used Prusament matte black PETG, but I’m not sure that matters.)
Screw holes are 3.8mm wide, with a 7mm counterbore that’s inset 4mm.