1 / 3
Open Spiral Christmas Bell — image 1
1 / 3

Open Spiral Christmas Bell

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€2.97 – €3.63 net (excluding VAT)

For file: open_spiral_bell_0.15mm_PLA_MK3S_4h31m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.30 excluding VAT (range midpoint).

Weight reported by the author
16 g
Print time reported by the author
4.52 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A fun and extremely light ornament for the tree

Rating
5 / 5
Likes
38
Downloads
249
Makes
1
Views
719
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Here's a fun and relatively easy print that weighs almost nothing. Mine came in at 6.6g!

I've added my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer. This model only needs one perimeter except at the top, where 2 is best for strength. No infill is needed. Supports are needed (see screenshot) and I recommend adding a brim on the outside and the inside for good bed adhesion.

Tags