1 / 3
Open Spiral Christmas Bell — zdjęcie 1
1 / 3

Open Spiral Christmas Bell

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A fun and extremely light ornament for the tree

Ocena
5 / 5
Polubienia
39
Pobrania
248
Wydruki
1
Wyświetlenia
712
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Here's a fun and relatively easy print that weighs almost nothing. Mine came in at 6.6g!

I've added my PrusaSlicer project file and GCODE for a Prusa MK3S+ printer. This model only needs one perimeter except at the top, where 2 is best for strength. No infill is needed. Supports are needed (see screenshot) and I recommend adding a brim on the outside and the inside for good bed adhesion.

Tagi