1 / 5
Plant Incubator — image 1
1 / 5

Plant Incubator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small plant incubator made for two grow-led (do not use any that could get warm) with watering function

Rating
0 / 5
Likes
4
Downloads
5
Makes
0
Views
82
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

Pretty straight forward, print the parts stick em together, i used plastic glue, holds sturdy. You'll need to glue the bottom parts together in the middle with enough glue to waterproof the floor to prevent leakage.

You will have to print the side connectors twice and the panel back twice but mirrored, same goes for the rainer distributor.  

You need 9 Slider and you can adjust how well the slide by adjusting the height of the slider support.

I used this [https://share.temu.com/xhCQvCIpAPB] china lamp and i'm praying it wont burn my house down.

How well the watering functions is very unstable, feel free to remix it, I've found that it very much depends on a slight angle for the planter.

Tags