Can Taser Prop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Dimensions & Compatibility
• Fits inside most 500 ml cans (inner diameter approx. 65 mm)
• Insert height: 151 mm (depending on version)
• Wall thickness: 3 mm
• Designed with ~0.25 mm tolerance for typical FDM printers
Recommended Print Settings
Material: PETG (recommended) or PLA
Layer height: 0.2 mm
Perimeters: 3
Infill: 15%
Print speed: 40–50 mm/s
Nozzle: 0.4 mm
Supports: None required
Temperatures:
• PETG: 230–240°C
• PLA: 200–210°C
Component Fit Guide
Component | Recommended size / type | Location | Mounting method |
|---|---|---|---|
Connection wires | 22–26 AWG | - | Routed loosely or lightly glued |
Push button | Ø 15–16 mm | Front hole | Lose or glue |
| DO | NOT | USE |
Battery holder | NOT NEEDED | along the body wall | Glued |
Battery | NOT NEEDED | Anywhere on wall | Inserted into holder |
Assembly Instructions
Cut the bottom od the can
Put man type wires into electrode holes
Glue head and body together
Slide insert into can
Cut hole for button
Insert button (remember to tight down holding screw)
Attach the lower part of the can through the protruding part of the body
Included Files (example listing)
• Body.stl – main body with button hole
• Head.stl – lid with electrodes
• Body.f3d, Head.f3d – (Editable) Fusion Archive Files
REMEMBER THAT U SHOULDN'T MAKE WORKING TASER/STUN GUN
AND IF U TRY MAKE IT WORK REMEMBER TO DO IT ONLY FOR EDUCATION PURPOSE AND WITH NO HIGH VOLTAGE