1 / 2
Shahe Digital Inclinometer - Multiboard / Multiconnect mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multiboard / Multiconnect mount for Shahe Digital Inclinometer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
A very simple mount for the Shahe digital Inclinometer.
You will need two Multiconnect connectors.
I added space for two 6×2 mm magnets (same as for gridfinity) to improve the connection and make attaching much more satisfying.
→ Pause the print at layer 22 and place the magnets inside before continuing.
Recommended Print Settings (Multiboard defaults):
Nozzle: 0.4 mm
Walls: 3 perimeters
Layer height: 0.2 mm
Infill: 15%
Supports: No supports needed
Material: PLA or PETG is sufficient