1 / 4
Print In Place Pop-Up Target Bullseye for Catapults and Nerf guns - 100mm/4in 14.8grams — image 1
1 / 4

Print In Place Pop-Up Target Bullseye for Catapults and Nerf guns - 100mm/4in 14.8grams

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print, pop-up, aim and fire!

Rating
0 / 5
Likes
15
Downloads
77
Makes
0
Views
247
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Print, pop-up, aim and fire! 

Target is stepped so that you can do some filament changes to give this target some life!

100mm diameter or about 4 inches.

Filament Swaps

First Layer is .35, rest of the layers printed at .2mm. Starting with red for the center target.

  • Pause 1 = .75mm change to orange for second target circle
  • Pause 2 = 1.15mm - change red to yellow for third target circle
  • Pause 3 = 1.55 - change yellow to green for fourth target circle
  • Pause 4 = 1.95 - change black for the rest of the base

My Print Settings:

  • Material: PLA
  • First layer height: 0.35mm
  • Layer height: 0.2mm
  • Wall thickness: 0.4mm 
  • Wall loops: 2
  • Wall order: Outer/Inner
  • Wall generator: Classic
  • Bottom surface pattern: Rectilinear 
  • Top surface pattern: Rectilinear 
  • Infill density: ~25% (for a heavier base)
  • Infill pattern: adaptive cubic
  • Nozzle size: 0.4mm 
  • Supports: Nope
  • Speed: You decide based on your printer! I printed it kind of slow at 40mm 

Print time is about 1 hour 15 min at the slower speeds

Tags