71 models
------------------------------------------------------------------------------------------------------------- This little print makes feeding filament quicker and easier. *TLDR - Instead of feeding filament directly into the PTFE tube…
I wanted to use the excellent bullseye fan duct on my Ender 3 but I've changed mine to direct drive with the genuine Creality kit. Anyone who's tried this will find the feed motor is in the way for the cooling fan. I have remixed the…
Stencil to assist in spray painting a bullseye on a 150mm round target. Scale up/down the x/y for different sized targets Print Settings Setting Walls 2 Layer Height 0.2mm Nozzle 0.4mm Material Any filament will work Infill 10% (only…
CR Touch mount for Bullseye fan. https://www.thingiverse.com/thing:2759439 This mount is shortened and adjusted to bring the CR Touch closer to the bed compared to the original. The original design did not get my CR Touch close enough to…
🐴 Voici Bullseye, le cheval le plus expressif et attachant de la chambre des jouets ! Ce modèle stylisé à l’image du célèbre destrier est parfait pour tous les fans de jouets animés. Sa posture attendrissante et ses grands yeux pleins de…
This is a remix of the original Ender 3 Bullseye BL Touch mount specifically for the CR Touch. Cutout for the cabling was added. All credit for the original goes to https://www.thingiverse.com/thing:2759439 You need to mount the bracket…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Reference https://www.thingiverse.com/thing:2759439 https://www.thingiverse.com/thing:4142358 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.15 (Cable Mount 0.12 /wo supports) Infill:…
This is a Remix of the Bullseye Blokhead. I'm calling it the "Slim Edition" as I've removed the chunky bits from the bottom to improve the visibility of in-progress prints. https://www.thingiverse.com/thing:2759439 It is ideal for use…
Woody's horse Bullseye Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning…
Remix of Petsfang Bullseye. Needed the smaller 4020 to fit underneath the generic direct drive. this is a remix of Petsfang Bullseye. I already had the mount so i just remixed the duct for the new fan. Also added heavier supports from the…
All information on the original page https://www.thingiverse.com/thing:2759439 Pros : lighter : 38g vs 51g with 4 walls 50% infill easier access to the nozzle Cons : requires supports
Bullseye String Art Printed with: Numakers PLA+
Created these bases for my Voxelab Aquila. This consisted of extending the left side of the base and adjusting the location of the screw hole to fit on the Aquila. Did this for the Blokhead / Bullseye base as well as the v2 Petsfang base.…
This model of Jessie & Bullseye was sponsered by @crippledlemm_1089444 Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale…
added a step file of the part cleaned up the part ONLY SUPPORT UNDER THE HOOK now fan is mounted with all 4 screws and you can access both mounting screws without removing fan If you like my design feel free to tip my design…
Toy Story Series - Bullseye
Basic simple 2 colour Black center with white outside bullseye replacement for gun stock. Apparently you can buy them on ebay or amazon, but I just made them for a friend. PLA or PETG, 0.20, Brim, infill 100%, White and Black. Requires 2…
Print, pop-up, aim and fire! Target is stepped so that you can do some filament changes to give this target some life! 100mm diameter or about 4 inches. Filament Swaps First Layer is .35, rest of the layers printed at .2mm. Starting with…
The accelerometer can be mounted on a little platform that attaches to the right hand side of the Bullseye fanduct. On my Ender 3, it slightly overhangs the X-axis arm, but doesn't interfere with anything. This is for the print head axis…
Muffler designed for the heat brake cooling fan for the Petsfang Bullseye fan duct for Ender 3. Tested with Bullseye on Ender 3 Pro, should fit all Ender 3 printers with Bullseye modification. Print laying flat on its face as shown in the…
🐴 Un fidèle destrier assis, prêt pour de folles aventures ! Ce cheval à l’allure comique, inspiré d’un célèbre compagnon de cow-boy, est un modèle parfait pour les fans de dessins animés. Assis dans une position détendue avec ses grands…
Use this for mounting your Bullseye LNB to a tripod-style mount. I use this for my Dreamcatcher station where I don't need a full dish, just the LNB pointed straight to the satellite. The tripod-style mount works great because you can get…
Simple stencil best used with a brush. I wanted a stencil that was sturdy enough to be handled without breaking. Usage: For best results, orient to surface to paint, then secure with painters tape. Use a paint brush with a flat head…
My kids didnt like that the clear case that the J'adore Campfire Harmonica (Target Bullseye Playground) came with doesn't stay shut, so I quickly threw this together real quick. This is my first ever print in place design, so bear with…
just made it fit the ender 5 remix from the original petsfang bullseye If you like my design feel free to tip my design https://www.paypal.me/Djdenzo Category: 3D Printer Accessories
on-target bullseye door. This can be a one shot latched door when mounted hinge to the bottom or it can be an open swing entry and re-close door when the hinge is mounted upward. This on-target fixture was designed for the 6-Shot Disc…
So, I have a 4020 Hotend fan on my Ender 3 and wanted to add a 5015 fan duct using the petsfang blokhead models to it. Now, the original blokhead only allowed for a 4010 fan, I found this here, and just stretched the middle part of the…
Magnet of the US Air Force Weapons School Bullseye that is on most of their patches. Designed to fits one small 6mm x 3mm magnet. Base layer is a dark grey. Red on patch is painted with red acrylic paint. G-Code has 2 layer pauses: 3.8mm:…
Hello! This is the first time Ive modified/created anything. I hope this helps someone. Its a modified Bullseye base to fit a Creality Spider 4.0 hotend to a CR10/Ender. Its much wider and taller than the MK8 hotend and the wiring coming…
Re-designed the original back parts of HOLY helix feeder to fit on a Bullseye 10kHz TXCO LNB and beeing printable without supports. For my printer the M112.5x3 threaded parts work best with the original cover. I also added a M112x3 and a…
I remade the original model, so it could hold my ball pan. It now fits any ball pen with diameter 10 mm ≤ d ≤ 12 mm . For the assembly you will need two M3 screws and 1 M3 nut. Print instructions Category: 3D Printer Parts Print Settings…
Just a remix from othe project to support a endscope camera in bullseye Print Settings Printer: Ender 3 Supports: Yes Resolution: 0.2 Infill: 20% Category: Machine Tools
Remix of: https://www.thingiverse.com/thing:4771559 Original design: http://www.dpetsel.com/files2print.html
Bullseye template for axe throwing, specifically for WATL standards.
This is a hat/cap for 3.2mm stem thru-hole 5-way switches, such as the thru-hole 5-way navigation switch found on Adafruit, made to resemble the “bullseye” style hat switches found on the sticks of fighter jets and flight sims. The model…
[Available in French below] Note : 40x40x20 fan is'nt compatible with hotend cooling. Hello everyone. I'm posting here my own adaptable cooling system on ALL Bullseye bases. I named it the ZEPHIR, available in 2 models I made a version…
65mm tiny toothpick drone frame. Designed for 26 x 26 AIO FC. Works well with an Air 65 canopy or similar. This is V1, with no battery mount. My build used a rubber band to hold the battery.
Print at a low layer height without supports[
UPDATE 20. October New enforced and remodeled mount uploaded :-) Print on the side for best result UPDATE 15. september Wait to print this. I've found a few "bugs" I need to sort out first :-) UPDATE 14. september After the first…
I liked the original but it had an issue that bugged me, for the screw to insert into the mount and fan the fan had to sit crooked. I also wanted to add a fan shroud to it. This version has the mounting arms moved and additional ones to…
22LR Ammo Block. This is used for Smallbore Bullseye Rifle shooting. Holds 2 targets of ammo plus sighter shots. There are 2 versions of the block. One has the targets numbered and one does not. Printing Material - PLA Build plate -…
Update:- There are now three versions here. Stock ender plastic extruder version. Metal creality extruder version. Plus the original version I use with the common red dual gear cheap chinesium extruder (stl named :- filament guide v4 2mm…
This is a simple template for drawing a bullseye on a target. My local range provides targets with a lot of open space on them, so I draw some extra bullseyes on them with a Sharpie. This is not set up to any specific standard, it's just…
I took inspiration from v_rod_fer's version and made it from scratch, since his STL is way too big and I needed a different diameter (8 mm) for the dial indicator. I adapted it for the new base file (BB_Stk.Base.E3v2.E4.E3_3.11.21.stl)…
My stock blower was dying and I was getting a lot of stringing, so I put these noctuas. This is specific for the Ender 3 Petsfang Bullseye Duct 9.27, which was made for the stock Ender 3 blower. Uses the screws that came with the Noctua…
This is a canteen I created you may have to move the model around to print it
3D Printed BullsEye Door Stopper for Printables Contest Absolutely loving the content? Dive deeper into the experience by hitting that 'Follow' button! 🚀 https://www.tiktok.com/@emergein3d https://www.instagram.com/emergein3d/…
This is a mount for an endoscope camera in combination with a Petsfang Bullseye on a stock Creality CR-10s. It winds around the petsfang to point the endoscope directly at the nozzle. The mount is supposed to be attached to the left of…
The Bullseye is notoriously effective and modular, but after finding my perfect combo (Bullseye - LEDs - 5015 part-cooling fan), I found it tedious to have the extra screws for the fan adapter and shoddy double-sided tape for the LED…
This is a crown/bob add-on for the Bullseye Duct: https://www.thingiverse.com/thing:2759439 Note: I have only designed this for the Ender 3 Pro version of the Bullseye. It will likely need to be remixed for use on other printers'…
This is a plate for Petsfang Duct. If you want to print it with 2 colors just add script (filament change) in Cura at the corresponding layer number. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Doesn't Matter Supports:…
Stencil size: 115mm x 115mm Line thickness: 7mm Bullseye diameter: 15mm Best used as a stencil for quickly spray painting a bullseye mark on a flat surface. Tipp: Since the stencil is rather small, I would tape some paper around the edges…
Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5828734 . Concept A 5.5mm endoscope mounting plate for the Petsfang Bullseye. Usage You will need to print: [1x] Endoscope mount You will also need a M3x10 (or…
This is a slightly modified version of this ( https://www.thingiverse.com/thing:3376399 ) LED bar. I've modified it to take a M3x10mm screw and nut Category: 3D Printer Parts
This is an adapter to fit duel stock Creality fans to the bullseye system, printed at 0.2 and using supports touching buildplate in cura. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2…
This mounts the FreeABL switch plate onto the right hand side of the Bullseye mount from https://www.thingiverse.com/thing:2759439 Create a left/right mirror of the original's FreeABL_switchPlate.stl. It's not enough of an updated design…
I liked the idea of having an LED under the Bullseye top part to illuminate the front of a print. I was going to make a simple angled bracket and just glue it to the bottom but Sixteenbit had the idea of combining it with the insert for…
I tend to use several nozzles on my ender. To keep track i usally put sticker on my bullseye. That could be better so i made a slicer with 0.6 and 0.4. Whenever i change the nozzle i only have to slide left or right to see what nozzle is…
NEW V1.1 File: edited the BL-Touch mount. The Screw to hold the Bullseye Fan Duct was a bit akward to insert. Hi there, i wanted to use the Creality Unicorn Hotend together with the HGX Lite Extruder and a BL Touch on my CR-10 S5. I…
“Step Right Up” hit the “Bullseye” and win a laugh. Made for the catch all tray contest, however didn't realize the UTC time zone and missed the deadline (only started my account the day before and it took some time to design and print).…
I needed a holder for a 40x40 LED light to mount to my Bullseye fan duct, so I made one that inserted into the front of the Bullseye where you can place your own front piece. Made it perforated to both reduce weight, and let some heat out…
matteeee's LED visor remixed to have a couple small slots to poke the leads of a LED or small LED cluster through. I happened to have a couple automotive 12v LED door lamp replacements, this turned that surplus into a great lighted…
Two ways to use it: 1. Print the STL. It is a 170 mm bullseye with a hanging loop, 3 mm thick, no supports. Hang it as a close-range practice target or as wall art in the gear room. 2. Print the PNG on A4 at 100% (no scaling) and staple…
This is the LHS version of my previous design. It fixes the FreeABL switch mount to the left side of the Bullseye fan duct. The offsets I use for this in Marlin, are 50mm left, 11 in front and 4.5mm lower than the nozzle. define…
Stop worrying about extinguishing your light source in the middle of a Slayer task. This Bullseye Lantern replica brings an iconic Old School RuneScape prop to your desk, providing the perfect warm glow for your late-night XP grinds.…
Ender 5 Bullseye base with integrated Touch Mi ABL support Version 1.0 Original part found here : https://www.thingiverse.com/thing:2759439 and here https://www.thingiverse.com/thing:3182917 Print Settings Rafts: Yes Supports: Yes…
BullsEye Bay Der Halter für 24 Dartpfeile , immer 3 Pfeile zusammen. Er passt für Dartpfeile mit einer Metall- oder Plastikspitze mit maximal 3mm Durchmesser - also für sehr viele Modelle. Perfekt auch für die Schule für eine Dart-AG .…
NEW V1.1 File: edited the BL-Touch mount. The Screw to hold the Bullseye Fan Duct was a bit akward to insert. Hi there, i wanted to use the Creality Unicorn Hotend together with the HGX Lite Extruder and a BL Touch on my CR-10 S5. I…
This is a model of Bullseye ripped by me from the Toy Story 3 game for WII. If printed in FDM, I recommend tree supports on the entire model. I recommend infill of at least 20% because the leg joints are so fragile. An alternative would…
