1 / 6
CR-10 S5 BL Touch + HGX-Lite + Unicorn Hotend + Bullseye Cooling Duct — image 1
1 / 6

CR-10 S5 BL Touch + HGX-Lite + Unicorn Hotend + Bullseye Cooling Duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

CR-10 S5 BL Touch + HGX-Lite + Unicorn Hotend + Bullseye Cooling Duct print in place

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
75
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

NEW V1.1 File:

edited the BL-Touch mount. The Screw to hold the Bullseye Fan Duct was a bit akward to insert.

Hi there, i wanted to use the Creality Unicorn Hotend together with the HGX Lite Extruder and a BL Touch on my CR-10 S5.

I couldnt find a model that would fit so i created my own.

The model is printed upside down and uses few supports.

Youll need:

HGX Lite

BL Touch

Unicorn Hotend

Set of metric screws M3-M5 

A piece of PTFE tube to connect the drive to the Hotend

I printed using PETG CF with a 0.6mm Nozzle

0.2 LH

You also need to print:

BULLSEYE_DUCT_9.27

https://www.thingiverse.com/thing:2759439

to use the original 4010 blower for part cooling

THIS IS A WORK IN PROGRESS!

Tags