1 / 2
5-Way Switch Hat / Cap (Bullseye)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Switch hat (or cap, top, tip, etc) for 3.2mm thru-hole 5-way switches.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a hat/cap for 3.2mm stem thru-hole 5-way switches, such as the thru-hole 5-way navigation switch found on Adafruit, made to resemble the “bullseye” style hat switches found on the sticks of fighter jets and flight sims. The model is sized to slide onto the switch with sufficient friction to hold it firmly in place, but not so much friction that it will be difficult to install/remove.
I printed mine on the Prusa i3 MK3S+ in Prusament PLA Galaxy Silver.
Recommended print settings:
- Layer height: 0.15mm
- Brim: 3-5mm
- Top/bottom fill pattern: Concentric
- Infill density: 20%
- Infill pattern: Grid
- Ensure vertical shell thickness: Disabled
- (Optional) Height modifier between 0-5.15mm to apply ironing to just the flat surface, but not the bullseye or the steps
- Other settings: Just use your standard settings for your printer/filament combo