1 / 2
5-Way Switch Hat / Cap (Bullseye)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Switch hat (or cap, top, tip, etc) for 3.2mm thru-hole 5-way switches.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a hat/cap for 3.2mm stem thru-hole 5-way switches, such as the thru-hole 5-way navigation switch found on Adafruit, made to resemble the “bullseye” style hat switches found on the sticks of fighter jets and flight sims. The model is sized to slide onto the switch with sufficient friction to hold it firmly in place, but not so much friction that it will be difficult to install/remove.
I printed mine on the Prusa i3 MK3S+ in Prusament PLA Galaxy Silver.
Recommended print settings:
- Layer height: 0.15mm
- Brim: 3-5mm
- Top/bottom fill pattern: Concentric
- Infill density: 20%
- Infill pattern: Grid
- Ensure vertical shell thickness: Disabled
- (Optional) Height modifier between 0-5.15mm to apply ironing to just the flat surface, but not the bullseye or the steps
- Other settings: Just use your standard settings for your printer/filament combo