1 / 1
Hawke scope easy parallax adjuster
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple parallax adjuster for the Hawke side focus telescopic sights. Uses a 2.5mm nut and bolt for tightening. Don't…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 79
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Simple parallax adjuster for the Hawke side focus telescopic sights.
Uses a 2.5mm nut and bolt for tightening.
Don't forget to orientate this to print flat in your slicer!
Print Settings
Printer:
DMS DP5
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10
Notes:
Print at .2 or better if you want a smoother surface finish.
This version utilises 2.5mm hardware for the bolt and nut required. a 12mm length bolt should be enough.
Category: Sport & Outdoors