Belt Deflection Tester - Spring Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an updated Belt Deflection Tester, designed to be used with closed-end springs.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is an updated Belt Deflection Tester, designed to be used with closed-end springs. The intent is to measure how much force the nozzle drag must impart into your print before it tweaks over, and likely fails.
The springs I used came from McMaster-Carr: https://www.mcmaster.com/3630N113/ however any spring will work, as long as it's shortish (20-30mm) and you know the spring constant. I figure it'll mostly be used to test belt improvements, so the biggest indicator is if you've improved or not.
An intro video, debuting it on my large bed ejector: