Raspberry Pi 5 + 4.3 inch DSI display RPI

Raspberry Pi 5 + 4.3” DSI Display — Snap-Fit Enclosure

This enclosure is a simple, functional housing designed specifically for the Raspberry Pi 5 paired with a 4.3” DSI display. It was created to provide a clean, compact form factor for projects that need a small screen and a protected Raspberry Pi in one unit.

A .STEP file is included for anyone who wants to customize or expand the enclosure. The internal geometry has been kept intentionally simple, making it easy to add your own brackets, standoffs, cable guides, batteries, or sensor modules.

If you need additional internal mounts, alternative layouts, or custom insertable modules, feel free to submit a request — I’m happy to design extra add-ons based on your needs.

Features

• 100% Snap-Fit — No screws or hardware needed
  All parts lock into place using integrated clips. Assembly is quick, tool-free, and reversible.
• Optimized ventilation
  A perforated bottom panel and additional side openings allow the Pi 5 to stay cool even under sustained load.
• Fully accessible ports
  Openings for USB, Ethernet, HDMI, power, and side interfaces ensure that the enclosure does not limit expandability.
• Designed for the 4.3” DSI display (cheap aliexpress waveshare clone)
  The display fits directly into the top frame, with a clean, minimal bezel.
• Simple geometry, reliable printability
  No support structures required when printed in the recommended orientation.

Printing recommendations

• Material: PLA / PETG / rPLA
• Layer height: 0.2 mm
• Walls: 2–3 perimeters
• Infill: 10–20%
• Supports: Not needed

Notes

This model does not include screws, inserts, or additional hardware — it’s entirely snap-fit.