BTT Pi TFT43 v2.1 top hat mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Relocate the display from the bottom front-center skirt location to a top corner.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The LDO v2.4 rev C kit shipped with a BTT 4.3" TFT RasPi display, and the default mounting position is in the front-center of the bottom skirt.
As part of the associated top hat mod, this part allows relocation to a top corner; the primary limitation is the 15-pin FCC DSI ribbon cable, as 1m is the purported functional limit.
NOTE: The corner pieces are complementary pairs since they are joined together with two M3x8 and heatsets--ensure you're printing the correct combination of parts to complete the tophat mod.
*Links to associated parts*
modified LDO display frame: https://www.printables.com/model/1496230
modified skirt piece to replace bottom display mount: https://www.printables.com/model/1496237
ribbon cable channel: https://www.printables.com/model/1498543