BTT Pi TFT43 v2.1 top hat mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocate the display from the bottom front-center skirt location to a top corner.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The LDO v2.4 rev C kit shipped with a BTT 4.3" TFT RasPi display, and the default mounting position is in the front-center of the bottom skirt.
As part of the associated top hat mod, this part allows relocation to a top corner; the primary limitation is the 15-pin FCC DSI ribbon cable, as 1m is the purported functional limit.
NOTE: The corner pieces are complementary pairs since they are joined together with two M3x8 and heatsets--ensure you're printing the correct combination of parts to complete the tophat mod.
*Links to associated parts*
modified LDO display frame: https://www.printables.com/model/1496230
modified skirt piece to replace bottom display mount: https://www.printables.com/model/1496237
ribbon cable channel: https://www.printables.com/model/1498543