Liczymy pasujące modele…
No print support needed! I know this is not the first model for this purpose, this one uses heat inserts (M3, 4mm long, 4.6mm or 5mm OD) Also added a bunch of additional mounting point (meant to use heat inserts M3, 4mm long, 4.6mm or 5mm…
New Year new MMU! New mounting brackets for MMU2S unit to allow relocating the CCA under the main unit such that the LED's are visible if the printer is set higher. Uses same hardware as the original. For a fancier F# display see:…
this mod relacates the y-endstop microswitch inside the cable-cover above the b-motor on a voron 2.4 i used the original design and stiffen it a little bit to ad room to mount a microswitch . it also containes the files for a block that…
This is a drawer handle that can be relocated to the top (shallow or deep back) or the side of the drawer (no back). It can be printed fast (0.2 mm) with no supports. Print facing up as on the photo. Two sizes are available (7 and 14 cm)…
I designed these corner belt covers for the Ender 5 Plus to work just like those designed by D_Jespersen's, and hopefully match the style, but function as covers for the ends of extrusion if you have relocated your crossbar like me. Since…
Because I have sleeping bed and foldable table in car, the original inner door handle was inaccessible and closing was problematic. So I created this handle which can be used also as handle for tailgate opening or closing. Installation is…
This model was created specially for using with Volcano nozzles, but it works just fine with original (proprietary) sovol nozzles. NOTE! You need to extend the cable for about 30-40mm so it reaches the connector It is recommended to print…
FINDA cable guide for “MMU2S Relocated CCA” For all the upgrades see: https://www.printables.com/model/110448-mmu2s-relocated-cca
Designed for and tested on an Ender 3 Pro - it may also fit other Creality printers that use the same LCD board. The tiny slot in the back is for the LCD ribbon-cable to pass through. Just split the ribbon down the middle or fold it in ½…
I think the original location of the Ender 3 power supply is better and safer than the V2 after I found myself reaching through the machine to turn it on or off. It prints on end with no supports needed.
I made a Remix to better fit my needs, this is what has been changed: - Added hole for IR LED (I glued a piece of clear plastic on the inside). - Added compartment for the Battery. You can use a piece of foam to hold the Battery down,…
Designed to be used with LM2596 LM2596S DC-DC Step Down Variable Volt Regulator Input 3.0-40V Output 1.5-35V Adjustable Buck Converter Printed low-quality 0.28mm Duramic 3D PLA+
Relocated my z chain and didn't like the cutout at the center on my bedfan cover.
This remixed fan shroud adds mounting holes on the left side of the shroud for mounting a BL Touch closer to the print head. The mounting holes are spaced to use the Ender 3 MAX bracket supplied with the BL Touch. There are three holes to…
Remix / recreation of https://www.thingiverse.com/thing:4852456 , that allows you to remove the top front bar of the X5SA (pro and non pro) and reroute the belts so that they don't interfere with your view of the printhead/printjob. While…
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Remarks The new location…
My Mojave 4s center driveshaft bearing wouldn't fit in the stock location as the TP 4050 that I've installed is slightly too large to fit the bearing in the normal spot. To fix this, I made a custom mount that securely holds the…
Modeled a little LED Guide for the modified MMU mount. Added and slightly modified the settings from CNC Kitchen to print it as clear as possible, but still keep it a little bit diffused. The 3mf file has these settings in it. (…
This is just a small modification of WellFan-Part2.stl. Go grab Part 1 and 3 from here ! I have my printer in a tight spot and the recessed hole that pacman42 did would bring my printer dangerously close to the front edge of my desk, so I…
Remixed Right bracket for use with https://www.printables.com/model/110448-mmu2s-relocated-cca while also using https://www.printables.com/model/19211-mmu2s-building-a-better-base
This model avoids an additional bend in the PTFE tube when a spool is placed higher than the filament buffer. It is a remix of the MMU3 printable parts \ Spool holder \ PTFE holder -> injection molded R4 version. Some spools are less wide…
I have a 1974 Honda CB550 - I don't like the ignition switch located at the side under the gas tank. I prefer having the ignition switch between the speedo and tach like later years. Unfortunately, it is a major parts swap to go to the…
This model was created specially for using with Volcano nozzles, but it works just fine with original (proprietary) sovol nozzles. NOTE! You need to extend the cable for about 30-40mm so it reaches the connector It is recommended to print…
