Arrma 4s Relocated Center Bearing Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Mojave 4s center driveshaft bearing wouldn't fit in the stock location as the TP 4050 that I've installed is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
My Mojave 4s center driveshaft bearing wouldn't fit in the stock location as the TP 4050 that I've installed is slightly too large to fit the bearing in the normal spot. To fix this, I made a custom mount that securely holds the driveshaft bearing in place. Note that the bearing will be loose as it's now further down the driveshaft. To combat this, I simply wrapped some electrical tape around the driveshaft and it fits perfectly now.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
No
Supports:
Yes
0.2
Infill:
100
Category: R/C Vehicles