TW200 Fender Lift Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.46 – €3.00 net (excluding VAT)
For file: T-Dub Fender Lifter v7_0.4n_0.25mm_PETG_COREONE_1h28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.73 excluding VAT (range midpoint).
- Weight reported by the author
- 65 g
- Print time reported by the author
- 1.46 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This bracket, used in combination with 4 flange bolts (M6x55mm) to raise the front fender up about 35 mm.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 90
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In the southern United States, the heavy clay mud can jam up a front tire on a motorcycle if the fender is too low. The Yamaha TW200 does pretty well in mud, but the front fender is a little low. This bracket can be installed under the fender mount to lift the fender up about 35mm, The extra clearance lets mud accumulate a little more so that under its own weight the mud slings off the tire.
Installation is cheap and easy, but it requires a couple of M6x55mm bolts.
I printed the part in PETG with 7 permitters and 15% cubic infill. Yes, it is practically solid, but I want it to hold up for a long while.
There is a video on You Tube that features this part: