1 / 11
IKEA VIDGA Single Rail Accessories
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This project contains some accessories for IKEA VIDGA Single Rail mounting system - like connectors, stabilizers,..
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
My little project contains some accessories for IKEA VIDGA single rail stuff. I had some problems during mounting over long distances (~12m). So, I had to improvise a little bit. Therefore, I created three different accessories to fulfill my requirements and fix several issues.
- Rail Connector
This connector has a quite tight fit. This is mandatory, in case you do not want to have a gap at x- or y- axis.
- 90 Degree Corner Stabilizer
This stabilizer helps to overcome the issue of a sag on a longer free running rail. Printed with small tree support.
- Single Rail Endpiece
This endpiece is quite inconspicuously. I needed some endpiece to have a more smooth transition in the 90 degree corner. This can be directly stick into the end of the rail, without any screw.
- Printer:
- Prusa Core One
- eSun PETG white
- 0.4mm nozzle
- 0.15mm STRUCTUAL profile
- 20% fill
- Orca Slicer
If you have any feedback, suggestions or anything, please leave a comment :)