1 / 11
IKEA VIDGA Single Rail Accessories
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project contains some accessories for IKEA VIDGA Single Rail mounting system - like connectors, stabilizers,..
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
My little project contains some accessories for IKEA VIDGA single rail stuff. I had some problems during mounting over long distances (~12m). So, I had to improvise a little bit. Therefore, I created three different accessories to fulfill my requirements and fix several issues.
- Rail Connector
This connector has a quite tight fit. This is mandatory, in case you do not want to have a gap at x- or y- axis.
- 90 Degree Corner Stabilizer
This stabilizer helps to overcome the issue of a sag on a longer free running rail. Printed with small tree support.
- Single Rail Endpiece
This endpiece is quite inconspicuously. I needed some endpiece to have a more smooth transition in the 90 degree corner. This can be directly stick into the end of the rail, without any screw.
- Printer:
- Prusa Core One
- eSun PETG white
- 0.4mm nozzle
- 0.15mm STRUCTUAL profile
- 20% fill
- Orca Slicer
If you have any feedback, suggestions or anything, please leave a comment :)