1 / 2
Wall hanger for broom print in place
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print in place wall mount for a broom or shovel
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 76
- Makes
- 0
- Views
- 608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
designed this as a print-in-place holder for things with a broomstick-like handle less than 25mm in diameter.
Two versions are available - long and short arms.
It is printed upside down you need to mount it with the v of the slots pointing down.
Apply a bead of hot glue to the inside of the two arms to increase the friction to the broomstick.
I printed mine in PLA with no supports .15mm resolution .4mm nozzle
the layer lines at .3mm made the arms not slide freely.
added radius corners to the arms inside the slots.