Mercury 1.1 Printed Double Shear Stepper Bottoms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mercury 1.1 Printed Double Shear Stepper Bottoms
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 157
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printed Double Shear Stepper Bottoms - I modified the Nebula stepper bottoms to friction fit a F695-2RS bearing. If your stepper shaft is long enough, it should slide right in and give you double shear. No other parts need to be modified. I am using some StepperOnline motors with 55mm shafts and I think 40mm will just barely work, but it would be safer to go 42mm or longer. You can use these without a Nebula frame, you just will not have the extra extrusion length to mount the most rear bolt, and that is fine.
Also, if you don't mind, post a make and provide some feedback. I would love to see if anything I am doing is helping someone else. Thanks! Happy printing.