1 / 1
IL Eurostick Magenta Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use a Magenta PCB on an IL Lever
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a complete IL Eurostick model, there is an included mod to the model that allows someone to use a Magenta PCB from Paradise Arcade on this lever.
The Magenta mod requires the following parts from the uploaded STLs.
Magenta Mount
Magenta Actuator
Magenta Z Stop
Magenta Cap
Magenta Mount Integrated would replace the Mount and another part of the IL lever if used. The integrated mount has not been fully tested. For the Magenta Actuator, it snaps over the C Clip and will locate to the center of the shaft. Use adhesive to glue a magnet to the bottom of the actuator.