Minimalist Key Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.11 – €0.14 net (excluding VAT)
For file: Thin Key holder (1)_0.2mm_PLA_MK3S_9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 9 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This was an original design by WhatsYourSettings, this was made for the competition and works quite well.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 39
- Makes
- 2
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is an original print made by WhatsYourSettings. For this print you don't need to have any support but it might be used to make it look better. For the back, you will need to use an adhesive square or circle. Then after that, you can stick it onto the wall and grab your keys as you leave.
Note, over time the adhesive will where off so if your item falls off you may just need to replace the sticker.