1 / 3
Herringbone Planetary Gear Mount for Busy Board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple spacer to mount the Herringbone Planetary Gear to a Busy Board (or any other board).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Share Alike
This is a simple spacer to screw the inner gear of the Herringbone Planetary Gear to a busy board. It guides the screw through the centre and also acts as a spacer so the gear doesn't rub on the board. The mount is designed for use with a 4mm diameter screw but also works with smaller ones (but make sure the head is large enough, or use a washer).
Printed in PLA, 0.4mm nozzle, 0.2mm layer height, no supports.