1 / 2
Simple Grommet / einfache Kabeldurchführung
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple grommet for cables/hoses up to 9mm diameter (to protect it from sharp plate edges). Drill-diameter: 13 mm
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 19
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I designed this simple cable grommet for my camper to allow cables or hoses with a diameter of up to 9 mm (~11/23") to pass through sheet metal (max. 1.2 mm) without being frayed by the sharp edges of the sheet metal.
Drill diameter for the grommet: 13 mm / 1".
Ideally, print with a flexible filament (in my case: PETG).
If the drill used is a 1"-drill: Scale down by 5 % in the x and y directions.
Or use the attached (parametric) FreeCad file to fit it to your needs.