1 / 1
Bottle Capper for 3 ml Perfume Bottles
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple bottle capper that applies pressure to snap the spray caps on 3 ml perfume bottles
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a simple bottle capper that applies pressure to snap the spray caps on 3 ml perfume bottles
The assembly requires 3 1/4 inch diameter bolts of an appropriate length so that the parts rotate on the smooth shank of the bolt and not on the threads.
I have printed using PETG with a very high percentage of infill with good results, but the stronger and higher the infill the better. The holes the bolts pass through may require some light filing to get adequate clearance for the bolts to pass through