Back-up Temporary Use Crosscut Saw Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lightweight back-up/limited use crosscut saw handle
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a lightweight back-up/limited use crosscut saw handle.
These parts will have limited life, but will work in a pinch. I print using PETG and 100% fill and the Saw Handle Part 4FW is a version that accepts 1/4 flat washers at a specific layer depending on the layer height you are using to add a metal interface to where the end of the saw mates to the handle for heater durability.
The stronger and tougher the material you can use the greater the life of the handle.
The hole going through the handle is sized for standard 7/16 inch diameter center bolts used with a large number of crosscut saw handles.