Infills with Trays - My 4 Most Used, plus some blank trays for your choice.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grid, Rectilinear, Honeycomb & Gyroid infills slide into the trays. I used PrusaSlicer.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 16
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
99% of the time, I use one of these 4 infills. I rarely go above 30% infill (50% in Grid) and if I do, I make it 100%. I mounted the Trays on my wall, next to my computer. Seeing the percentage of density on a actual, printed piece before I print is a big help.
Printing the Infills: In your slicer, choose the infill and the percentage you want, with Zero Top & Bottom Layers. Then repeat to fill the tray.
Printing the Trays: Color change at layer 4.20 I included a blank 5 Slot and 7 Slot tray with no text.
Side Note for the Grid Tray having 7 Slots: If you look at the last picture, you'll see the comparison of the Grid and Rectilinear infills. I was surprised to see the Rectilinear infill is 2X denser than the Grid infill, where 10% Rectilinear = 20% Grid......15% Recti = 30% Grid, etc.....(but the Grid does have better layer adhesion.)