1 / 2
Stackable 10mm Extension for Virpil/Thrustmaster
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your own joystick extension!
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 76
- Makes
- 0
- Views
- 892
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Press Like for encouragement. Comment for improvement.
Make your own joystick extension!
Assembly:
- Stack as many extensions as you need. Each extension brings your joystick 10mm closer to its ideal height.
- The top most extension has a slightly longer thread.
- For Virpil, you can use 2x JST PH male 5-pin extensions to make a wiring extension.
Disclaimer:
- Plastic isn't as resilient as the metal of the grip.
If you can make those parts out of metal: do. Otherwise consider resin. If it's not an option, don't be cheap on the plastic. For all structural parts: use PLA or better, go 100% infill and print with an angle (potential crack to filament layer). Adapt the joystick response curves so you don't yank your stick like a mad man. Then it'll be fine.