ADS-B RF Component Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some parts I designed while working on my ADS-B Receiver
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
LNA Enclosure: I designed this to hold a NooElec LaNA LNA just below the antenna in the feedline. I used a 12 inch piece of coax to adapt the N-type connector of the antenna to the SMA of the LNA. I used some adhesive lined shrink tube to seal the enclosure to the coax. The bottom of the enclosure nests inside the top the shed water.
Raspberry Pi mount. This holds a raspberry pi 3b, Yahboom PD Power Expansion Board, and PoE Texas passive PoE injector. The PoE injector sits below the ethernet/USB ports of the rPi.
RF Component Mount: Holds a NooElec NESDR Smart, FlightAware ADS-B filter, and a GPIO Labs Bias-t injector.