Counting matching models…
Auf der Suche nach dem perfekten LED Rahmen für Lithophane, bin ich auf ein Flurlicht mit nützlichen Funktionen gestoßen. Das LED Licht kann gedimmt, in der Farbtemperatur eingestellt und mit einem Schukostecker ausgestattet werden. Mit…
I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…
3D scan of Forearm Bone Scan - Ulna (Right) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection of high-quality, anatomically accurate 3D scans of human…
Here we have Polnareffs Earrings witch I Modeled with Solidworks. There is the right and the matching left earring in the folders down below in different versions. You will find the .prt File for Solidworks and .step for other CAD…
3D model I sculpted of Kjalnar Tombskald from Elder Scrolls Online, commission ordered by zbzszzzt123 on Reddit. The head doesn't have any detail, as the original commissioner already had one they were using.
my wife wanted her handles of the crochet hook ( Häkelnadel) more ergonomic. So it's easier to have the tip always in the same position. She says, these handles work perfect. most of the old handles could be pulled off using a small vice.…
This is a battery mount/shim to fit a Di2 battery in the seatpost of a Colnago C64. The wall thickness of mine is quite variable and there are seams, so I made two versions to test the fit, and have uploaded both. What also might work is…
This is a little housing for the ADS-B filter that is commonly sold on Aliexpress and Amazon. I used 2 wood screws that I had laying around to close the lid, but a M2 will work too.
Gopro hinge type garmin lamp mount for colnago specific seat tube, easy to mount, light weight. Parts: -2 pcs M3x20 screw -2 pcs M3 nuts -1 M5 standard gopro screw with M5 nut -Gopro hinge type Garmin quicklock Print: -ABS -25% infill…
Náhradní držák k této svítilně vymodelovaný na základu originálního. Použij podpěry viz. screenshot. KSL 421141
adjust "scheibe" for the thickness of your pane Print instructions Category: Bathroom
I designed it to fit the Ikea Molnart bulb in a HÅRSLINGA lamp stand, should fit other 125mm (GU125) bulbs as well. Gets hold in place by the bulb itself. Print settings I used 1.2mm Line Width (0.8mm Nozzle, with 0.4 you can go up to 0.8…
Are you looking for a study aid that isn't just a "visual approximation" but a faithful reflection of human biology? 🎓 Introducing the Radius and Ulna (Forearm Bones) model, part of the prestigious Asklepios Series. This model was created…
Hanger that I created for Ikeas LILLNAGGEN squeegee. This hanger fits shower doors that are up to 6.5 mm thick. You will need to enable supports to print this model.
If you'd like a custom shelf depth, open the freecad project and update dimensions spreadsheet, update will happen automagically :)
Elna Supermatic bobbins have a groove on the inside of the cylinder which means normal bobbins don't fit on the top winder. The original metal bobbins are solid on the bottom and have 7 holes on the top side, which allow you to see the…
Spool holder to suit Elna overlocker, but may fit other brands. Spindle 6mm Bottom 34.6mm Top 18mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Category: Machine Tools
Auf Basis des Mpox Videos (https://www.youtube.com/watch?v=FQhjvb-AEAs) habe ich eine Halterung für das LED-Panel erstellt, welche auch mit einem Prusa Mini oder A1 mini ohne Probleme gedruckt werden kann. Gedruckt mit PETG und 15% Infill…
This is a replacement gear for the Elna Supermatic. The old gear in hard plastic broke after several decennies of usage. It needed a bit of postprocessing as the gear teeth do no really comply with the standard gear measures. The machine…
Custom-made enclosure for a LNA4ALL Low Noise Antenna Amplifier ( http://lna4all.blogspot.com ). Note this is NOT a radioelectric proof case, it is just a mechanical protective box to preserve the electronics. It is made in two pieces:…
This fits on most roadbike handles and can fit on mountain bike ones too. Print with 0.2mm nozzle or 0.4mm.
Ten zestaw to perfekcyjne rozwiązanie dla każdego, kto chce stworzyć własną lampę LED G13 (świetlówka LED 230V), idealną do oświetlenia wnętrza samochodu podczas detailingu. Dzięki niemu uzyskasz równomierne, jasne światło, które ułatwi…
V pripade uplneho otevreni lze vlozit vicko na vetraci past https://www.chov-cmelaku.cz/produkt/vicko-na-vetraci-past/ Pri vetrani je !! NUTNE POUZIT NASTAVEC NA VETRACI OTVOR !! jinak si do cmelinu sami pustite skudce…
Hanger for hanging the ikea wiper lillnaggen on the glass sheet in my shower printed in prusament lime green
Description A very simple and easy to use holder for IKEA LILLNAGGEN printed within 25 minutes in the shown orientation. Just place it everywhere in your shower using double sided adheasive tape. Printing Printing requires support in…
Streamed the design of this guy a while ago. Included is a rough model of the original part, and my new reinforced one. Have fun!
Soporte para limpiacristales Lillnaggen. Pegar con adhesivo de doble cara o silicona
Nothing clever to add here that wasn't clarified in the summary. Pretty straightforward part to be honest, definitely not tens of hours of work and 50+ features.
I printed the original vented case version of RandyR's thing but found that the size was a wee bit too small for my LMA4ALL board. This rework increases the internal dimensions slightly as well as increasing the wall thickness in order to…
A simple keychain model. In Slicer, you can set a double color in layers. I recommend printing only one perimeter. If you want a different name or place, send me a private message and I'll add the keychain here.
Epipremnum aureum is easy enough to propagate but depending on the cuttings, it can be a pain to keep the leaves out of the water. I designed a little disk that fits loosely on a chap Ikea STELNA cup to hold the leaves in place while…
Came across a 1951 or so Elna “Grasshopper” sewing machine, the rubber feet from 70 years ago were unsurprisingly as hard as rock. Once the original is pried out the new should just push on. You can change the walls and infill on TPU to…
Elna Presser Bar Lifter #411461-10 I recommend printing with supports at 100% infill as the middle of the presser bar has an angle step which is a weak spot. The part is very similar to the original Elna one however the arm does not get…
The original artowri is made by Nádor Judit 1967 and can be viewed in the Zsolnay Múzeum in Pécs.
Dekorace na zárubeň dveří. inspirace: https://makerworld.com/en/models/231895#profileId-248895
Hi there, Ive designed this case after a recent purchase of the AB-IOT-868 rf amplifier to use with a meshtastic node, I wanted to do something that was fairly easy to assemble and using cheap parts easily available, this makes use of the…
The curtain gliders I designed are used in Elnagh and Trigano brand motorhomes. They serve as replacement parts for the windshield's blackout curtain. This is the first 3D model I created myself in Onshape. I also made a version with a…
Case for NanoDLNA Logic analyzer made by Muse Lab The base was designed because of no protection of board itself and barely readable text on the silkscreen. Printed from PLA to 0,15mm. Best orientation is at the USB C conenctor's side to…
Krabička a spínač pro mini svítilnu. Dokoupit je potřeba diodu a plochou baterii. Případně rezistor pro delší životnost.
This is a 3D-model for the Light clamp (Bride lumiere, Lichtklemme, Brida luz) part for the Elna Lotus 15 (ec), 25 (zz), 35 (sp) and 36 (tsp) sewing machines. The design is somewhat awkward, as the attachment is on one side and most…
Compatible with : https://www.rtl-sdr.com/product/rtl-sdr-blog-wideband-lna-bias-tee-powered/ Everything is friction fit, no hardware required :) Printed in PLA at 0.3mm layers 20% infill.
A perhaps overbuilt shelf bracket replacement for Ikea Svalnas shelves commissioned by Idauria . Print with supports for the pin, 2 shell perimeter seems to be strong enough, print with 3 if you are worried about it. 15% grid or…
Druckbar ohne Stützstruktur! Restliche Parameter nach Geschmack und können vom eigenen Drucker wählen!
Beschreibung Eleganter Herz-Schlüsselanhänger als hochwertiges 3D-Druck-Modell mit weichen Rundungen und integrierter stabiler Öse. Das Design kombiniert eine romantische Herzform mit moderner Linienführung und eignet sich perfekt als…
Kann durch einfache ankleben den Abzieher halten.
ADS-B LNA filter case. You will need 6x M3x8 mm. Printing with supports, Infill: 15% Share your printed model.
I printed this in PETG, without supports, with a brim and with a painted seam at the back. The back includes an indentation to place double sided tape (0.8mm thickness, 15mm width).
Udostępniam prosty model zatyczki wodoszczelnej do gniazda zasilania DC 5.5x2.1mm. Wydrukowane z użyciem Fiberlogy MattFlex 40D. Udostępniam w dwóch wariantach: gniazdo kątowe montowane od środka obudowy (…
I needed hook to be attached with double sided tape (used 3M universal montage tape) and suit IKEA LILLNAGGEN inbuilt hole. Dimensions: 20 x 20 x 19 mm I've included SCAD file for easy modifications if needed. Printing instructions:…
A sturdy waterproof box for the VHF Design ( https://www.vhfdesign.com ) range of QRO LNA devices with added supports to hold the LNA in place at the top of the box. V1 - A simple box with internal supports for the VHF Design QRO LNA and…
A replacement knob for a broken one. The PDF contains the graphics for the switch selector. I just hand draw the prototype and it is like that since :D Print with 0.3mm layer height and 30% plus infill. Added the STEP file for easy…
Airbuddy LNA amplifier reference model for Meshtastic and Meshcore nodes. This is made as precise as my calipers allowed, so add some tolerances when creating your model with this in mind.…
Nastavitelna noha stolu o průměru 40 mm
Holds a TQP3M9037 LNA or similar. Contains 3 M3 screw holes for mounting. Print upright.
Tělo je slepené a vejde se do něj pouzdro na 3V baterii CR2032. Uzpůsobeno pro 5mm LED diodu a klasické tlačítko. Hodí se třeba na noční procházky do lednice… přece jenom šlapat neustále na lego kostičky už spoustu lidí nebaví. ;-)
Simple Housing for Wemos D1 mini and nRF24L01+PA+LNA Wemos D1 mini and nRF24L01+PA+LNA = Wemos Antenne unten WemosD1mini-nRF24L01+PA+LNA-Antenne-Top = Wemos Antenne oben
these filtered LNA devices are more effective if they're on the antenna side of your feed line.. but the uputronics devices are not suited to be outside so I designed this simple enclosure. Printed in ASA for maximum UV protection. It…
Kilka opcji lamy stojącej lub kinkietu wygląd może być dowolny zależy od kombinacji jaką wybierzemy. Projekt stworzony w programie FreeCad. Wystarczy wydrukować poskręcać dokupić standardowe oprawki do żarówek z kabelkami itd. i może…
I have designed a pricking needle stand for my children. The pricking needle stand is suitable for a needle with a lengt
Design Concept The "TRITAN planter" features a unique geometric pattern that imbues a sense of artistic design, ideal for indoor plants or ornamental purposes, with fuzzy skin in certain details Use This planter is designed to enhance the…
The Polnareff's earring from the anime JoJo's Bizarre Adventure I looked for this earring on a bunch of different platforms, but I couldn’t find anything I really liked, so I decided to make my own design! Unlike some other creators, I…
model za predal zamrzovalne omare gorenje ZOS 203 20.3D
Case for thermal epoxy potting the common Active SAW Filter & LNA module for cooling. I use mine with my flight radar ADS-B setup. Note: The printing tolerances are very tight (50μm) so that the epoxy does not escape while it is still…
As title, girlfriends machine broke the Lever (just old I guess). This is designed for use without the steel insert and will slot right onto the shaft. Bit of a squeeze to get past the covers, but easily do-able. Needs to be printed…
This is a replica of the default computer mount for the colnago (V4RS). The original one was too short for my Garmin 1040. The original interface for the Garmin system is needed (Screw + Nut). Be careful to the printing orientation to…
Náhradní kryt světla kabiny vozidla A15 (hasičský speciál). S jeho aplikací je důrazně doporučen přechod na LED žárovku namísto klasické tepeplné baňky. Instrukce k tisku: průhledný materiál PETG/PLA (ASA) výška vrstvy 0.16 a níže (z…
IKEA MOLNART cylinder bulb: https://www.ikea.com/ca/en/p/molnart-led-bulb-e26-150-lumen-cylinder-glass-striped-00586770/ IKEA TVÄRHAND lamp: https://www.ikea.com/ca/en/p/tvaerhand-table-lamp-black-bamboo-60518410/
Replacement plug housing for Elna Grasshopper sewing machine. It has been modified to make it easier to route the wires and attach to the machine. PETG recommended for this model. **Model is in imperial units
Colnago V4RS seatpost light support. The two screws holes are designed for the garmin insert.
zrcadlo souustružené z hliníku možné nahradit něčím jiným diodu nutné připojit na chladič (hliníkový přední konec externí tlačítko pro rychlé ovládání palcem (pushbutton) vytvořeno pro cqb airsoft
Cover for Jew's Harp Volna
I've built a case for my pcb that holds 1 esp32 and 2 nrf24l01+pa+lna I've attached photos so the exact placement of the esp32 and 2 nrf chips can be seen. The case also have 2 holes to store the antennas safely. The case have a small…
I printed this in PETG, without supports, with a brim and with a painted seam at the back. The back includes an indentation to place double sided tape (0.8mm thickness, 15mm width).
IKEA MOLNART cylinder bulb: https://www.ikea.com/ca/en/p/molnart-led-bulb-e26-150-lumen-cylinder-glass-striped-00586770/ IKEA TVÄRHAND lamp: https://www.ikea.com/ca/en/p/tvaerhand-table-lamp-black-bamboo-60518410/
Design Concept The "TRITAN planter" features a unique geometric pattern that imbues a sense of artistic design, ideal for indoor plants or ornamental purposes, with fuzzy skin in certain details Use This planter is designed to enhance the…
Simple Housing for Wemos D1 mini and nRF24L01+PA+LNA Wemos D1 mini and nRF24L01+PA+LNA = Wemos Antenne unten WemosD1mini-nRF24L01+PA+LNA-Antenne-Top = Wemos Antenne oben
these filtered LNA devices are more effective if they're on the antenna side of your feed line.. but the uputronics devices are not suited to be outside so I designed this simple enclosure. Printed in ASA for maximum UV protection. It…
Kilka opcji lamy stojącej lub kinkietu wygląd może być dowolny zależy od kombinacji jaką wybierzemy. Projekt stworzony w programie FreeCad. Wystarczy wydrukować poskręcać dokupić standardowe oprawki do żarówek z kabelkami itd. i może…
This is a 3D-model for the Light clamp (Bride lumiere, Lichtklemme, Brida luz) part for the Elna Lotus 15 (ec), 25 (zz), 35 (sp) and 36 (tsp) sewing machines. The design is somewhat awkward, as the attachment is on one side and most…
A cooler for a Narda LNA to help maintain a steady temperature to maintain a steady S21 power level (around 36dB). Without a heatsink, the Narda LNA (Model Number: LNA-30-04001200-15-10P) heats to around 60c and has a S21 power loss of…
This hardware is no longer available from IKEA as spare hardware because Svalnas shelving has been discontinued. I picked up a load for cheap locally and was missing some hardware. I needed the pin to bear some more shearing force and the…
School badge model with frame. Inscription to be made in slicer. Model odznaki szkolnej z ramką. Napis do wykonania w slicerze.
Don't you want hang your IKEA LILLNAGGEN while you are showering ?
This is a model for an enclosure for commonly sold LNAs on AliExpress. The measurements of the LNA are approximately 40 x 23.5 mm. I printed the enclose standing up on the non-lid side using supports (see photos). I used PLA. I might have…
The RealNationPrint Fidget Roll 2025 is a compact, modern fidget tool designed for smooth motion, tactile feedback, and everyday stress relief. Its ergonomic curved body fits naturally in the hand, while the dual rotating end rollers…
Wanted to redesign my lamp shade so the bulb sits centered inside. Prints with a 55 degree overhang, requires a capable printer and good bed adhesion. I added a large brim to prevent slipping. I printed it in PLA, as the bulb never gets…
Support for attaching a Lenovo P53 Power Supply brick to an Ikea SVALNÄS rail. just print: Lenovo_SIDE (x2) Lenovo_BACK Lenovo_FRONT Lenovo_BOTTOM (x2) and press-fit assemble the support. Fix the support using an M6 Bolt or the SVALNÄS…
Shelf brackets for the IKEA Svalnas shelving system. These brackets hold a plank of wood measuring 75mm x 20mm (3" x ¾") on end at a slight angle and mount to the Svalnas rails using the stock mounting bolts. I use this to hold all of my…
3D scan of Forearm Bone Scan - Ulna (Right) Thanks to the Institute of Anatomy First Faculty of Medicine Charles University for the possibility to scan this model. A collection of high-quality, anatomically accurate 3D scans of human…
Convienent storage place for the ikea squeegee. It slides in from the side.
Easily printable Ulna Left. Image segmentation made in 3D slicer. Made from CT scan of my left hand. Lehce tisknutelná Ulna Levá ( Loketní kost). Segmentace CT dat dělaná ve 3D sliceru. Vytvořeno ze skenu mé levé ruky.
My Mother-in-law gave me this broken part for her Elna 744 sewing machine. I measured it as well and created a replacement part for her in fusion360. This is one of my very first models every made, but it ended up working quite well for…
