1 / 5
Case for Active SAW Filter & LNA Module
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for thermal epoxy potting the common Active SAW Filter & LNA module for cooling
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 58
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Case for thermal epoxy potting the common Active SAW Filter & LNA module for cooling. I use mine with my flight radar ADS-B setup.
Note: The printing tolerances are very tight (50μm) so that the epoxy does not escape while it is still liquid. You will want to print with a reasonably good quality for it to fit, otherwise you will need to sand it down slightly with a dremel or similar rotary sanding tool.