4020 to 5015 Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I remade the 4010_to_5015 adapter to a 4020 to 5015 adapter. I'm using a SUNON MB40202V2-0000-A99 Fan (Not Pictured),…
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 160
- Makes
- 2
- Views
- 1,328
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I remade the 4010_to_5015 adapter to a 4020 to 5015 adapter. I'm using a SUNON MB40202V2-0000-A99 Fan (Not Pictured), which is quiter then a stock 4010 fan and most blowers, but still gives great cooling. I had to slightly modify the actual duct to accommodate the new adapter shape. If you already printed out Tragical's duct, just filing down the part of the duct that would touch my modified shroud works perfectly fine, rather then printing a full new duct.
I've included an overhang test, so you can see that the design is effective. The overhang was printed at 60mms with .2mm layer.
The Fan Shroud part of the adapter is remixed from Demon_mkiii remix of ChipCE and DEjello designs. Yeah it's a lot of Remixing.
Demon_mkiii Design: https://www.thingiverse.com/thing:4372247
Fan Link: https://www.amazon.com/gp/product/B0084ZNAU0
Print Settings
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.20
Infill:
25
Filament: Inland ABS black
Notes:
The 4020_to_5015 adapter can be printed out of PLA without an issue, but I'd suggest the duct be printed out of ABS just due to heat and potentially warping.
Category: 3D Printer Parts