Tray for toddler 3x3 cube puzzle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tray for holding a 3x3 puzzle made of 44x44x44mm cubes. To make storage and play a little easier.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This tray is intended for simple cube puzzles that are just shy of 44mm on a side. This can help with both storing and play as it makes it easier for children to keep the blocks all together when trying to assemble the puzzle. There's a little bit of wiggle room so that the blocks can be moved about without
I've redesigned the tray with a new version and added a lid. The lid should fit snugly over the top of the tray with all 9 blocks inside.
The kumiko pattern on the top was generated using Froqstar's kumiko pattern script for Open SCAD https://github.com/froqstar/kumikoPatterns
Printing recommendations
Walls: 3 or 4 (because toddler)
Layer Height: 0.2mm
Infill: 20%
Supports: none
For the lid orient the top to print on the bed that way you won't need any supports.