Concrete snowman figurine - mold and accessories
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
build your snowman out of concrete and get fancy to make him pretty. For outdoor or indoor decoration or as a present
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 31
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Make your own cute snowman for outdoor or indoor decoration
You love 3D printing and decorating for winter or Christmas, but your family just gives you an eye-roll whenever you proudly present another “plastic thingy”?
Here’s the solution:
Print this mold for a small snowman that you can cast out of concrete. You still get your beloved 3D-printing time, and your family will appreciate a decoration that isn’t made of plastic.
You can even turn it into a family project: mixing and casting can be done together. Then let the little ones search for stone pebbles/grit, and small branches, or let them paint the snowman. You can even involve grandma by giving her the task of knitting a cute hat or crocheting a scarf.
Are you a 3D designer? Remix and publish fun 3D-printed accessories to customize the snowman. Make it your project, your style, and proudly share your make with us and others!
Print settings
you can scale the mold as you like, but I wouldn't recommend to go below 50%.
Print all models in the orientation as provided.
mold
Material: PLA
at 100% scale a minimum of 4 walls.
layer height: 0.2 mm
Infill I recommend 5% adaptive cubic
avoid print seams on the mold seams, otherwise a quick sand after printing is needed
mold arm inserts
Material: can be better removed from the concrete wenn printed out of TPU.
Otherwise PLA will also dolayer height: 0.2 mm
2 walls and little infill
support needed (on buildplate only)
hat, buttons, eyes, mouth-pieces
Material: as you like, consider outdoor use and if PLA is suitable for your environment (heat, UV)
top and bottom fill pattern: concentric
hat: layer height 0.2 mm, don't forget the color change if wanted
buttons, eyes, mouth, nose: layer height < 0.2mm for a finer result
Concrete casting
Scale | mold height | mold diameter | snowman height | snowman volume |
|---|---|---|---|---|
100% | 270 mm | 156 mm | 262 mm | 2170 mL |
75% | 202,5 mm | 117 mm | 196 mm | 916 mL |
50% | 135 mm | 78 mm | 131 mm | 272 mL |
Prepare the mold with a release agent. If you don’t have anything specialized, just use a light coat of (sunflower) oil.
Insert the arm pieces so that they sit flush with the outside of the mold. If they are a bit loose, use some tape to thicken them so they fit snugly inside the mold.
Clamp the two halves of the mold together with hose clamps (if you don’t have any, look for 3D-printable versions).
I recommend taping the bottom seam with masking tape to prevent water leakage.
After mixing your concrete, fill the mold in batches and compact the concrete by gently tapping the mold with your hand or a rubber mallet.
Wait for 2 days before de-molding.
Accessories
For eyes, mouth, and buttons, use the provided 3D-printable models or find suitable natural materials.
I recommend using 2-part epoxy glue to secure the accessories to the concrete.
Safety instructions
For your safety, use a protective mask and gloves when working with concrete.
The finished snowman becomes heavy very quickly (at 100% scale it weighs around 5 kg), so place it on the floor and avoid putting it somewhere high where it could fall on someone.