1 / 6
Concrete snowman figurine - mold and accessories — zdjęcie 1
1 / 6

Concrete snowman figurine - mold and accessories

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

build your snowman out of concrete and get fancy to make him pretty. For outdoor or indoor decoration or as a present

Ocena
0 / 5
Polubienia
17
Pobrania
31
Wydruki
0
Wyświetlenia
267
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Make your own cute snowman for outdoor or indoor decoration

You love 3D printing and decorating for winter or Christmas, but your family just gives you an eye-roll whenever you proudly present another “plastic thingy”?

Here’s the solution:
Print this mold for a small snowman that you can cast out of concrete. You still get your beloved 3D-printing time, and your family will appreciate a decoration that isn’t made of plastic.

You can even turn it into a family project: mixing and casting can be done together. Then let the little ones search for stone pebbles/grit, and small branches, or let them paint the snowman. You can even involve grandma by giving her the task of knitting a cute hat or crocheting a scarf.

Are you a 3D designer? Remix and publish fun 3D-printed accessories to customize the snowman. Make it your project, your style, and proudly share your make with us and others!

Print settings

you can scale the mold as you like, but I wouldn't recommend to go below 50%.
Print all models in the orientation as provided.

mold

  • Material: PLA 

  • at 100% scale a minimum of 4 walls.

  • layer height: 0.2 mm

  • Infill I recommend 5% adaptive cubic

  • avoid print seams on the mold seams, otherwise a quick sand after printing is needed

mold arm inserts

  • Material: can be better removed from the concrete wenn printed out of TPU.
    Otherwise PLA will also do

  • layer height: 0.2 mm

  • 2 walls and little infill

  • support needed (on buildplate only)

hat, buttons, eyes, mouth-pieces

  • Material: as you like, consider outdoor use and if PLA is suitable for your environment (heat, UV)

  • top and bottom fill pattern: concentric

  • hat: layer height 0.2 mm, don't forget the color change if wanted

  • buttons, eyes, mouth, nose: layer height < 0.2mm for a finer result

Concrete casting

Scale

mold height

mold diameter

snowman height

snowman volume

100%

270 mm

156 mm

262 mm

2170 mL

75%

202,5 mm

117 mm

196 mm

916 mL

50%

135 mm

78 mm

131 mm

272 mL

  1. Prepare the mold with a release agent. If you don’t have anything specialized, just use a light coat of (sunflower) oil.

  2. Insert the arm pieces so that they sit flush with the outside of the mold. If they are a bit loose, use some tape to thicken them so they fit snugly inside the mold.

  3. Clamp the two halves of the mold together with hose clamps (if you don’t have any, look for 3D-printable versions).

  4. I recommend taping the bottom seam with masking tape to prevent water leakage.

  5. After mixing your concrete, fill the mold in batches and compact the concrete by gently tapping the mold with your hand or a rubber mallet.

  6. Wait for 2 days before de-molding.

Accessories

For eyes, mouth, and buttons, use the provided 3D-printable models or find suitable natural materials.
I recommend using 2-part epoxy glue to secure the accessories to the concrete.

Safety instructions

For your safety, use a protective mask and gloves when working with concrete.
The finished snowman becomes heavy very quickly (at 100% scale it weighs around 5 kg), so place it on the floor and avoid putting it somewhere high where it could fall on someone.

Tagi