1 / 14
Christmas Bell Earrings 22mm Update SORRY Christmas Bell Earrings 01 faulty. Print in Place (2 Gramm) — image 1
1 / 14

Christmas Bell Earrings 22mm Update SORRY Christmas Bell Earrings 01 faulty. Print in Place (2 Gramm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Weihnachtsglocken-Ohrringe 22 mm Update LEIDER Christmas Bell Earrings 01 fehlerhaft. NEU , Christmas Bell Earrings 02

Rating
0 / 5
Likes
7
Downloads
17
Makes
0
Views
61
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Weihnachtsglocken-Ohrringe 22 mm Sorry LEIDER hat sich beim exportieren von Christmas Bell Earrings 01 ein fehler eingeschlichen. ( Schlägel fehlt )

NEU , Update Christmas Bell Earrings 02 ( mit Schlägel )Print in Place

Weihnachtsglocken aus denen Ihr mit solchen Ohr-Häkchen Eure eigenen Weihnachts-Ohrringe machen könnt. Ein Hingucker für den Weihnachtsmarkt b.z.w. die Festtage.

diese Häkchen gibt es in guten Bastelgeschäften oder im Online-Handel.(die Häkchen sind im 3D Modell nicht enthalten)

Maße der kleinen Glöckchen

Höhe ohne Öse 22mm / Höhe mit Öse 26mm

Glocken-Durchmesser unten 22mm

Maße Öse D 5,5mm / d 2,5mm / B 1,8mm

Als Material empfehle ich PLA, PETG oder PC. Bei Verwendung von PLA wiegt ein Glöckchen knapp 2 Gramm.

TPU könnt Ihr nehmen wenn Euch die Geräusche "verrückt" machen, der Glockenschlägel ist beweglich (muss aber je nach Druckqualität eventuell vorsichtig "frei-gebrochen" werden).

Ich empfehle einen Füllgrad von 25 bis 100%

 Bei Print in Place ist es manchmal notwendig nach dem Druck die beweglichen Teile mit vorsichtiger Gewalt loszubrechen - zu lösen.

Frohe Festtage 🎅

----------------------------------------------------------

Google translates:

Christmas bell earrings 22 mm Sorry UNFORTUNATELY an error occurred when exporting Christmas Bell Earrings 01. (mallet missing)

NEW, Update Christmas Bell Earrings 02 (with mallet)

Christmas bells that you can use to make your own Christmas earrings using these ear hooks.

An eye-catcher for the Christmas market or the holidays.

These ticks are available in good craft stores or online.(the checkmarks are not included in the 3D model)

Dimensions of the small bells

Height without eyelet 22mm / height with eyelet 26mm

Bell diameter below 22mm

Dimensions eyelet D 5.5mm / d 2.5mm / W 1.8mm

I recommend PLA, PETG or PC as the material.

When using PLA, a bell weighs just under 2 grams.

You can use TPU if the noises drive you "crazy", the bell beater is movable (but may have to be carefully "broken free" depending on the print quality).

I recommend a filling level of 25 to 100%

When printing in place, it is sometimes necessary to use careful force to break the moving parts loose after printing.

Happy Holidays 🎅

Tags